I. Introduction Osborne A220 is a single-component modified solvent methyl little thread locking adhesive. Glue gap filling screw to prevent corrosion and loosening, no paint and plastic surfaces in contact with the impact, good toughness after curing adhesive, anti-vibration, has a good locking, sealing, and corrosion resistance. Second, the typical uses for the demolition of the M6 ??less frequent small screw locking seal and corrosion. Such as: electronics, telecommunications equipment, household appliances, photographic equipment, furniture, bicycles, motorcycles and other small screw locking, sealing, corrosion. Third, the use of 1. Clean the screws, remove oil and water vapor, it is recommended Osborne cleaners. 2. With this product immersion, smear or drip connection can screw around with. 3. The assembled member was allowed to stand for 24 hours. 4. Remaining in the surface excess glue, wipe with ethanol directly. Fourth, other information For more detailed product technical data in English (TDS), use of technology, material safety data sheets (MSDS), Environmental Report (SGS), please contact your local sales representative or distributor Osborne.